1. Connect the BONX to a Mac computer using a USB cable.

*Depending on the type of Mac computer, you may not be able to directly connect to the USB connector. Please make sure to use the appropriate adapter when connecting.

2. Follow the instructions as displayed and proceed.

⬇︎

Select the first 4 digits of the serial number.

⬇︎

You will be able to select the version of firmware to be updated.

⬇︎

*Simultaneously press down for about 10 seconds. Once you have verified that the light blinks yellow and then turns off, click "update" and begin the update.

⬇︎

When the update has successfully finished, the update is complete.